Contact Form

 

 

First Name
Last Name
City
Email Address
Daytime Phone
Evening Phone
Tell us about your project
	= Required

Contact Information

 

 

Name: Mike Fennell
Address: 5181 Catalpa Knoll Acworth, Ga 30101
Phone: (678) 331-3060
Email: Comiing Soon
Website: Coming Soon

FAQ

 

What is a "Bulb"?
Is it a light bulb, or is it a lamp? Both! Many people use bulb in place of lamp but lamp is the correct term.  Note that most fixtures do not include the lamp with purchase so you will have to purchase the lamp (or bulb) separately.

What is a "Fixture"?
A fixture is the functional and decorative housing that the lamp screws or plugs into that supplies power. Common fixtures in your house include a chandelier or a sconce.  Landscape lighting fixtures are the metal (or plastic) fittings that you wire in place to illuminate your outdoors setting.

What is "Light Spread"?
Light spread is the area of light coverage you will get from one fixture and lamp. When selecting path or accent lighting, the light spread you choose can either highlight the natural night beauty of a tree or light it up like a Christmas tree.  As an example, a 12-degree spot pointed at an object that is 4' feet away results in a 1' diameter circle of light.  When selecting fixtures and bulbs, look at the designated light spread.  40-Degrees is considered to be a " flood" where 10-Degree is considered to be a "spot".

What is "Voltage Drop"?
Voltage Drop is the decrease in the voltage along a 12V electrical wire.  See our Voltage Drop how-to page.

What is "Cable Length"?
Cable length is the entire linear dimension (# of feet) of the cable (wire) used from the transformer to the fixture experiencing voltage drop. See our Voltage Drop how-to page for more information.

What is "Total Watts"?
Total watts are the sum of the wattages of EVERY lamp along the cable length. See our Voltage Drop how-to page for more information.

What is "Cable Constant"?
Cable constant is a numerical value determined by copper wire size.  A thicker wire results in less voltage drop.
See our Voltage Drop how-to page for more information.

- back to top 

---

 How do I....?

How do I select a transformer?
Each transformer has a detailed description of features to review.  If you still want help, please either call or email us!

How do I test the system once it is installed?
Turn the transformer on to

• make sure system is working properly
• see if you have good connections
• see if all fixtures are illuminated well

If one fixture is not working properly, take a voltage meter and test voltage at the connection and socket.

• If lamp is dim and voltage is <10 volts, there is a voltage drop problem. To solve this problem, move the fixture closer to the transformer or make a separate run.  
• If not all of the fixtures illuminate, check the voltage at the transformer terminal block. If there is no voltage, check to see if the transformer is plugged in and turned on. Check the voltage at the receptacle too.

Why do my lights dim towards the end of my cable?

• See our Voltage Drop how-to page for more information.
• Check to make sure the end of your cable has a clean cut and none of the strands of wire are touching the other side.
• If you have any spliced cable off your main run, make sure this splice is soldered and you have a secure connection.

Besides fixtures and lamps, what else do I need?
Before beginning installation, gather accessories you may need including:

• Anti-corrosion compound to protect the socket from corroding.
• Jell-filled wire nuts or quick connectors to attach fixture to main cable.
• Electrical tape for wire nuts to prevent movement or loosening of connections (highly recommended).
• Staples for attaching to decking, patio covers, trees or other type structures.
• 4 x 4 cedar or treated post for mounting the transformer next to receptacles.
• "in-use" weatherproof receptacle covers to protect against shock or premature circuit breaker tripping to water access.
• Ground fault interrupter circuit (GFIC) for all updating outdoor receptacles.
• Matches or tube of silicon to seal up exposed connections or wires.
• Extra stakes and lamps.
• Trenching shovel or spade for burying wires.
• Low-voltage multi-meter for testing.

How do I mount the fixtures?
Mounting is determined by the location and type of the fixture. Metal canopies allow you to mount fixtures to a deck or soffit, while plastic stakes are for mounting into the ground.

What do I do with the wire at the end of the cable?
The cable is harmless and there is no threat of electrical shock. However, to prevent shorting out the system in damp soil conditions, seal the wires with electrical tape.

Portfolio

 

 

 

Exclusive Offers

Testimonials

 

 

- It is a pleasure dealing with a professional contractor that has a superior product. They showed up on time and did exactly what they said they would.

 

- Professional, courteous and punctual.

- Was one of the cleanest and seamless installations of any of our exterior home projects.

Driving Directions

 

Click Here For Driving Directions